Blog

Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS

Recently, organic compounds such as biomolecules and pesticides have been analyzed using the IC-ICP/MS method. This method was shown to be suitable for examining molecules of relatively small masses that are present as ions. IC-ICP/MS can also be used to monitor chelating agents, which are often used in industrial processes and have the potential to pollute the environment. Another field of application is the analysis of organophosphates in battery research (Knöll, J., 2012).

Aminopolycarboxylic-acid-based chelating agents such as 1, 2-cyclohexylenedinitrilotetraacetic acid (CDTA), diethylene triamine pentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) are all agents commonly used in industrial process and household products. 2-BROMO-1-PHENYL-PENTAN-1-ONE

Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS

These chelating agents can easily pass through the wastewater treatment plant and reach surface waters, where they are only poorly biodegradable. These agents then enter the drinking water cycle via the groundwater. Despite generally being nontoxic themselves, these chelating agents can mobilize toxic metals from the river sediments and make them biologically available.

An indirect method that required only minimal sample preparation was developed for the determination of ultra-trace amounts of aminopolycarboxylic acids present in surface water. In order to convert the chelating reagents into negatively charged complexes, metal ions are added to the water sample. These complexes are then separated by ion-exchange chromatography (IC). An online coupled ICP/MS detects the complex’s central metal ion, to deduce the concentrations of the chelating agents from this. Shown in Figures 1 and 2, iron and indium were investigated as two metal ions of nominal charge +3.

Figure 1. Separation of the Fe(III) complexes of NTA, EDTA, DTPA, and CDTA in less than 15 min using column-switching.

Figure 2. Fe (III) complexes (top) and In(III) complexes (bottom) of EDTA, DTPA, and CDTA demonstrating the increased sensitivity for indium. Column 1: DV-080429-1A2 20 mm × 2 mm, PEEK, capacity 20 μmol; column 2: DV-080429-1A1 100 mm × 2 mm, PEEK, capacity 100 μmol; eluent: 20 mmol/L NH4NO3 (pH = 2); flow rate: 0.6 mL/min; m/z 56, 115.

In terms of sensitivity and detection limits in the lower ng/L range, In3+ gave the best results. Due to the low retention of the complex, the trivalent complexing agent NTA could not be accurately determined. Both iron and indium complexes of CDTA are strongly absorbed on anion exchangers and showed retention times of more than 1 hour. The retention time was decreased to less than 15 minutes by using column-switching. A sample set of 62 samples was used to validate this method. The same sample set had been previously analyzed by an external water laboratory based on the DIN EN ISO 16588 using the GC-MS technique.

Two-dimensional ion chromatography for the separation of ionic organophosphates generated in thermally decomposed lithium hexafluorophosphate-based lithium ion battery electrolytes.

Kraft, V.; Grützke, M.; Weber, W.; Menzel, J.; Wiemers-Meyer, S.; Winter, M.; Nowak, S. (2015) J. Chrom. A 1409, 201–209

At Metrohm is one of the world’s most trusted manufacturers of high-precision instruments for chemical analysis. Metrohm was founded in 1943 by engineer Bertold Suhner in Herisau, Switzerland. Today, Metrohm is represented in 120 countries by subsidiaries and exclusive distributors. The global Metrohm Group also includes the Dutch companies Metrohm Applikon and Metrohm Autolab, manufacturers of online analyzers and instruments for electrochemical research, respectively. Recently, the Metrohm Group was joined by Metrohm Raman, a leading manufacturer of handheld Raman spectrometers.

Metrohm is the global market leader in analytical instruments for titration. Instruments for ion chromatography, voltammetry, conductivity, and stability measurement make the Metrohm portfolio for ion analysis complete. Instruments for Near-infrared and Raman spectroscopy are another, strongly growing segment of the Metrohm portfolio.

Metrohm is a problem solver, both in the laboratory and within the industrial process. To this end, the company offers their customers complete solutions, including dedicated analytical instrumentation as well as comprehensive application know-how. More than 30% of the company’s employees at the Metrohm international headquarters in Herisau work in R&D.

Metrohm has been owned 100% by the non-profit Metrohm Foundation since 1982. The Metrohm Foundation, which does not exert any influence on the company’s business operations, sponsors gifted students in the natural sciences, supports charitable and philanthropic purposes and, above all, ensures the independence of the company.

Sponsored Content Policy: News-Medical.net publishes articles and related content that may be derived from sources where we have existing commercial relationships, provided such content adds value to the core editorial ethos of News-Medical.Net which is to educate and inform site visitors interested in medical research, science, medical devices and treatments.

Last updated: May 16, 2020 at 5:17 PM

Please use one of the following formats to cite this article in your essay, paper or report:

Metrohm USA Inc.. (2020, May 16). Indirect Ultra Trace Determination of Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS. News-Medical. Retrieved on January 02, 2024 from https://www.news-medical.net/whitepaper/20170920/Indirect-Ultra-Trace-Determination-of-Aminopolycarboxylic-Acids-in-Surface-Water-using-IC-ICPMS.aspx.

Metrohm USA Inc.. "Indirect Ultra Trace Determination of Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS". News-Medical. 02 January 2024. <https://www.news-medical.net/whitepaper/20170920/Indirect-Ultra-Trace-Determination-of-Aminopolycarboxylic-Acids-in-Surface-Water-using-IC-ICPMS.aspx>.

Metrohm USA Inc.. "Indirect Ultra Trace Determination of Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS". News-Medical. https://www.news-medical.net/whitepaper/20170920/Indirect-Ultra-Trace-Determination-of-Aminopolycarboxylic-Acids-in-Surface-Water-using-IC-ICPMS.aspx. (accessed January 02, 2024).

Metrohm USA Inc.. 2020. Indirect Ultra Trace Determination of Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS. News-Medical, viewed 02 January 2024, https://www.news-medical.net/whitepaper/20170920/Indirect-Ultra-Trace-Determination-of-Aminopolycarboxylic-Acids-in-Surface-Water-using-IC-ICPMS.aspx.

Accurate Detection of API Release from Sustained-Release Tablets Using Near-Infrared Spectroscopy

Analysis of Gadolinium-Based MRI Contrast Agents Using IC-ICP/MS Technique

Automatic Potentiometric Titration for the Fabrication of Plastics

Benefits and Uses of IC-ICP/MS Method

Compliance with FDA 21 CFR Part 11 by Metrohm Raman

Content Determination of Amino Acids Using Ion Chromatography

Detection of Mercury and Methylmercury Using IC-ICP/MS Method

Determination of Cation Content in Tobacco Additives

Determination of Chromium Species in Soil and Pharmaceuticals by IC-ICP/MS Method

Determination of Glyphosate and AMPA in Drinking Water Using Ion Chromatography with Pulsed Amperometric Detection

Determination of Metformin Hydrochloride Assay According to USP

Determination of Nicotine in Tobacco by Non-Aqueous Titration

Determination of Silicate and Borate Contents in Water Using Non-Suppressed Anion Chromatography

Determining Permeability of Intestine Lactulose and Mannitol by Ion Chromatography with Pulsed Amperometric Detection

Dissolution Testing by NIRS for Fast, Accurate, Non-Destructive Assessment of Tablets

Estimation of Citrate in Detergents as per ASTM D4608

Estimation of Nitrilotriacetates in Detergents as per ASTM D4954

Estimation of pHe of Denatured Ethanol Fuel with a pH Meter as per ASTM D6423

Estimation of the Alkalinity in Seawater, Brines, and Brackish Water as per ASTM D3875

Fatty Acid Verification and Identification

Fully Automated Fluoride Determination in Blood Samples

Fully Automated Titrimetric Determination of Active-Substance Content Using 815 Robotic Titration Soliprep

Investigation of MRT Contrast Media Containing Gadolinium by Means of IC-ICP/MS Analysis

Ion Chromatography – A Universal Technique with Many Applications in the Pharmaceutical Industry

Ion Chromatography for Food, Water and Pharma Analysis When HPLC Fails

Metrohm NIRS Solutions and Software Enable Pharmaceutical Analyses that Comply with Common Regulations

Metrohm’s Fully Automated Method for Determination of Water Content in Tablets

Metrohm’s Vision Air Pharma Software Meets Technical Requirements of FDA CFR Part 11 for NIR Spectroscopy

Mira DS Automated Raman Material ID For Defense and Security Professionals

Mira DS from Metrohm Raman: Attachments for All Your Sampling Needs

Near-Infrared Assay for Rapid and Accurate Determination of Content Uniformity of Tablets

Near-Infrared Spectroscopy Helps Improve Quality and Efficiency of Pharmaceutical Production Lines

Nicotine and Glycerin Quanitification in E-Liquids Using Visible NIR Spectroscopy

NIRS for the Determination of Water Content in Moisturizing Skin Creams

On-Field Determination of Arsenic, Mercury, and Copper in Ground Water

Orbital-Raster-Scan Sampling Technique Enables Handheld Raman Systems to Reliably and Rapidly Determine Heterogeneous Samples

Orbital-Raster-Scan Technique Helps Improve Performance of Mobile Raman Systems for Pharmaceutical Analysis

Palm Oil Product Quality Determination

Quality Monitoring of Radiopharmaceuticals with Ion Chromatographs from Metrohm

Quantification of Baicalin Content in Scutuellaria Baicalensis Powder (Herbal Supplements) by Vis-NIRS

Rancimat Method for the Oxidation Stability of Fats and Oils

Rapid and Effective Content Determination of Tablets Through Fully Automated Sample Preparation

Rapid and Non-Destructive Analysis of Solid Dosage Forms with NIRS XDS RapidContent Analyzer

Redox Speciation Analysis of Iron Using IC-ICP/MS Technique

Redox Titration of Vitamin C of Milk Powder Employing the Double Au-ring Electrode

Seven Important Parameters for Analysis of Edible Oils and Fats

Simple, Rapid, and Accurate Ion Analysis of Pharmaceutical Products with Metrohm Inline Matrix Elimination

Simultaneous Determination by Vis-NIRS of Xanthan Gum, Optical Density and Glucose Concentrations in Aqueous Solutions

Simultaneous Speciation of Arsenic and Selenium Species in Petroleum Refinery Wastewater

Trends and Developments of Ion Chromatography in Pharmaceutical Analysis

Ultra Trace Determination of Bromate in Drinking Water by Microbore Column IC and ICP/MS

Using EPA 300 Method for Determination of Anions in Tap Water

Using IC-ICP/MS Analysis to Discover Effectiveness of Ozonization of Iodinated X-ray Contrast Media

Using IC-ICP/MS Method to Determine Organic and Inorganic Arsenic Species

Using IC-ICP/MS Technique to Separate Antimony Containing Nanoparticles in Airborne Particulate Matter

Using ICP/MS or ICP/OES Method for Detection of Dimethyl Thallium in Water Samples

Using In-Line and Off-Line NIR Methodologies for Real-Time Predictions of Moisture Content and Particle Size in Fluid Bed Granulation

Using Ion Chromatography and Subsequent UV/VIS Detection to Determine Nitrite and Nitrate in Tobacco

Using Ion Selective Electrode for the Determination of Ammonium

Using Ion-Exclusion Chromatography with Inverse Suppression to Determine Boron Content in Fluoridated Drinking Water

Using Ion-Exclusion Chromatography with Inverse Suppression to Determine Organic Acids in Monoethylene Glycol

Using Near-Infrared Spectroscopy (NIR) for Quantification of Active Ingredients in Shampoo

Using Near-Infrared Spectroscopy for Quality Control of Active Ingredients in Hair Creams

Using Near-Infrared Spectroscopy for Quality Control of Active Ingredients in Hairsprays

Using NIR Spectroscopy for Determining the Moisture, Fat, and Nitrogen in Human Feces

Using NIR Spectroscopy to Detect the Water Content of Soft Contact Lenses

Using Pulsed Amperometric Detection to Determine Carbohydrates in Orange Juice

Using Solid-State Standard Additions for Determining Active Ingredients in Solid Pharmaceutical Formulations

Using Vis-NIR Spectroscopy to Qualify Droplet Morphology in Hair Conditioner

Vis-NIR Spectroscopy Quantification of Shampoo Surfactants

Vis-NIRS Enables Simultaneous Determination of Iodine Value, C8–C14, and Total Fatty Matter in Soap Noodles

News-Medical.Net provides this medical information service in accordance with these terms and conditions. Please note that medical information found on this website is designed to support, not to replace the relationship between patient and physician/doctor and the medical advice they may provide.

News-Medical.net - An AZoNetwork Site

Aminopolycarboxylic Acids in Surface Water Using IC-ICP/MS

4551-92-2 supplier Owned and operated by AZoNetwork, © 2000-2024