Aeromotive, a manufacturer of aftermarket fuel systems and accessories, has developed universal PTFE fuel lines and hose ends to be used in a wide variety of applications. Related Articles - Driven UTV-ATV Oil - Darton LS Seal Tight Sleeve Kits - Fluidampr Nissan VR38DETT Damper
The new PTFE fuel lines and hose ends provide superior resistance to harsh fuels such as gasoline, E-85 ethanol, methanol and other racing fuels compared to traditional nitrile rubber hose as well as a more professional finish. Ranging from -60 degrees to more than 200 degrees Celsius, PTFE carries a wide temperature tolerance, making it the best choice for any application facing extreme conditions. Unlike rubber fuel line, PTFE acts as a vapor barrier to prevent fuel odors from permeating and provides protection against any static electricity buildup with a built-in carbonized liner. Cold Air Intake Kit
Aeromotive’s PTFE fuel lines come in three diameters — AN-06, AN-08 and AN-10 — and in four lengths from 4 to 20 feet. PTFE hose ends are available in four sizes — AN-06, AN-08, AN-10 and AN-12 — and as straight-fitting, 45-degree, 90-degree and 180-degree ends (180-degree ends for AN-08 only).
The Aeromotive PTFE fuel lines are available in braided stainless steel and black-jacketed, braided stainless steel for superior strength and a professional finish. For more information: www.AeromotiveInc.com.
The specially engineered pan is fabricated from 6061-T6 billet aluminum and features a .250” thick rail, .125” body and a .500” plate to mount the pump.
Aviaid has created a compact dry sump system for the latest generations (3, 4, 5) of the Viper V10 engine. The new package is centered on a 7-stage series 1 pump, which features five oil pan scavenging sections, one pressure section, and one section for scavenging a turbocharger. It can be configured with as many or few sections as desired, while a fuel pump can be driven off the back of the pump.
Graymills’ new Tempest MHF spray washer, which stands for manual, high-pressure, front load, comes in two models.
Increases fuel delivery pressures to 50 to 100 bar on high-output port-injected gasoline engines.
Foggit protects your engine by displacing moisture from metal to prevent corrosion.
The Goliath injector can deliver fuel injection pressure up to 350 on select gasoline direct-injected engines and increase flow by approximately 65 to 70 percent compared to OEM injectors.
Sunnen’s new SH-4000 builds on the 21-year heritage of the successful EC and ML series machines.
Hot Shot’s Secret’s Adrenaline Racing Top Lube reduces wear and scuffing, lubricates upper cylinders and the entire fuel system.
The Stanadyne Goliath performance pump is a high-quality, modular solution addressing the fuel flow limiting factors of stock mechanical fuel pumps when trying to increase the power output of GDI engines.
ACL’s LS Short Groove Main Bearing Set suits the Gen III and IV LS small block engine and is now available.
Braided Fuel Line Kit Content for engine professionals and enthusiasts